Cable, NexStar RS-232 Allows your computerized telescopes to be controlled using a laptop computer or PC. Once connected to your hand control port, the telescope can be controlled using popular astronomy software programs. This cable connects to...
Cable UBS to RS232 Converter This cable is used to convert a serial cable into a cable that is compatible with standard USB ports. Recommended for use with our RS-232 cable (93920) and our Programming Cable (93922) which both feature serial...
Car Battery Adapter For use with CGE, CPC, Advanced GT, NexStar Series, (all supplied standard), this adapter allows you to power you telescope directly via the car cigarette lighter, or Celestron’s PowerTank receptacle.
Meade Accessory Shelf This convenient tray secures to the threaded rod and provides a place to keep eyepieces and other accessories off the ground and easy to reach while observing. The Accessory Shelf consists of a round, flat surface with a lip to...
Meade Cable Connector Kit w/Software for 494 Autostar equipped models The #506 Cable Connector Kit w/Software allows control of the any Meade telescope with the model 494 Autostar keypad hand control, including Meade ETX-60, ETX-70 and ETX-80 and...
Counterweight, Extra 11# (for CG-5 Mount) 11 lb. counterweight for use with CG-5 mounts. Using accessories such as cameras, Lens Shades, Tele-Extenders and the 2" Diagonal will affect the balance of your Celestron Schmidt-Cassegrain telescope....
Standard photo/video tripod is extremely light and portable while performing well with most mid-size optical products (binoculars, spotting scopes). Features quick release bracket and pan handle control. Includes 1/4"-20 mounting screw. Recommended...
Celestron Motor Drive for EQ AstroMasters and PowerSeekers Compatible with all German Equatorial (EQ) AstroMaster and PowerSeeker telescopes. Manual For Astromaster Motor Drive
Short Vixen type dovetail plate for dual rings Mounts Stellarvue rings to the M1 and M3 mounts, Vixen mounts, CG5, EQ5, GP, LXD55 and similar clone mounts from China. Center 1/4-20 hole attaches plate to a camera tripod. Has side slots for the...
Long Vixen type dovetail plate for dual rings Mounts rings to the Stellarvue M1 and M3 mounts, Vixen mounts, CG5, EQ5, GP, LXD55 and similar clone mounts from China. Center 1/4-20 hole attaches plate to a camera tripod. Has side slots for the safety...
Celestron Polar finder CG-4 (Omni Mount) This useful accessory speeds accurate polar alignment by providing a means of visually aligning your German equatorial mount with Polaris and true North. As a result, you can spend more time observing and...
Meade #505 Cable Connector Kit w/Software, for use with Autostar The #505 Connector Cable Kit w/Software allows you to update your AutoStar and run your scope form your computers serial port. For use with #497 AutoStar equipped models including...
Counterweight shaft and adapter. Mount adapter attaches to either side of the M7 mount and has a threaded receptacle for the counterweight shaft. 20mm stainless shaft with washer and safety screw with T nut. Counterweight not included. A...
Power Tank, 12v Power Supply For any Celestron computerized telescope. Now you can take your telescope anywhere with this portable rechargeable power supply. Whether you have a computerized telescope or operate your telescope using motors,...
Stellarvue TP-6 3" Standard Dovetail Plate Wide dovetail plate mounts directly to either arm of the M6 mount. You can mount any Stellarvue ring system to the plate for direct attachment. This plate also works with the 3" Dovetail Base...
Stellarvue TD2 Spring Loaded Dovetail Base Same dovetail shown used on the Stellarvue M1 and M3 mounts. Attaches with two 1/4-20 cap head screws that are 1.5" apart. Holds the TP5 plate and the standard Vixen style GP/CG5/EQ5 dovetails. Also...
Mounts the Stellarvue M2 and M3 mounts to any surveyor's tripod such as the Stellarvue #TA tripod. Use this column for tripods that use the Surveyor's tripod 5/8-11 bolt.
Heavy Duty Dual Rings for 78 - 85mm Stellarvue telescopes . Features a large footprint. Has multiple 6mm holes on both sides spaced at 60mm and 1 1/2" apart and one in center. Uses an oversized aluminum knob with rubber grip making it easy to...
Stellarvue TP-19 3" Superplate A 19" dovetail plate designed for the Stellarvue 160, 165, and 190 telescopes. 3" Wide dovetail fits the TD3 dovetail base above as well as Losmandy and Mountain Instruments mounts. Mount rings with a...
Losmandy sized Dovetail Base and Accessories 7" Spring Loaded Dovetail Base. Attaches to either arm of the M7 for use with our TP-6 dovetail rail below. Also holds the standard Losmandy and Mountain Instruments plates such as the DUP and DUPS...
Heavy-duty alt-azimuth tripod features sturdy aluminum tripod with accessory tray and slow motion flex cables for fine adjustments. Features 1/4"x20 mounting screw. Recommended for: SkyMaster 20x80 and 25x100 binoculars Ultima 80 and 100 Spotting...
